BAU15S CANBUS LED bulbs OS-LE-004

LED daytime running lights in the direction indicators SET CONTAINS: Two LED bulbs with the indicator function and DRL 4x endings (2x for PY21W, 2x for P21W) 2x resistors for deceiving the CAN-BUS installation The set includes the AUTOMAT module for free! PRODUCT DESCRIPTION: These diodes are mounted are in the turn signal bulb socket. Thanks to the use of two colors of LEDs on one bulb, an effect simulating daylight DRL (white LED) or indicator light (orange LED) was achieved. Daytime running lights turn on automatically after turning the key in the ignition switch Daytime running lights turn off after turning on the dipped headlights APPLICATION: Mounting: BAU15S (PY21W) LED type: 5730 chip LED quantity: 20x Light power: 20W (2x10W) Power consumption: 0.17A Light power : 271 lm / 271 lm Input voltage: 12V Resistor: 50W 6ΩJ CANBUS: Yes Some cars have lamps with voltage supply to the indicator bulb integrated with the lamp (e.g. BMW, PEUGEOT 407, OPEL VECTRA, AUDI A4 B6 ...) Direction indicator bulbs holder in these cars has no exposed power cables. In such cars it is necessary to connect to the cube or wires supplying power to the lamp. Attention, this type of lighting is inconsistent with the ECE. For off-road use only. Use in traffic on public roads may be a reason for granting a fine, keeping the registration certificate. Thanks to the built-in CAN-BUS filters, the bulbs should work properly in cars equipped with this installation. DESPITE THE HIGH EFFECTIVENESS OF THE FILTER, EXCEPTIONS MAY HAPPEN WHERE THIS FILTER WILL NOT HELP, IN SUCH CASES, PLEASE CONTACT OUR COMPANY! Led daytime running lights in direction indicatorsSET CONTAINS: Two LED bulbs with indicator function and DRL 4xW, 2x under PY21 under P21W) 2x resistors for deceiving the CAN-BUS system The set includes the AUTOMATIC module for free! PRODUCT DESCRIPTION: These leds are mounted in the socket of the direction indicator bulb. Thanks to the use of two colors of diodes on one bulb, the effect simulating daylight DRL (white diode) or indicator light (orange diode) was obtained. Daytime running lights turn on automatically when you turn the key in the ignition Daytime running lights turn off when the dipped beam is activatedAPPLICATION: Mounting: BAU15S (PY21W) Type of LED: 5730 chip Number of LEDs: 20x Light power: 20W (2x10W) Power consumption: 0.17A Light power: 271 lm / 271 lm Input voltage: 12V Resistor: 50W 6ΩJ CANBUS: YesIn some cars there are lamps with voltage supply for the direction indicator bulb integrated with the lamp (eg BMW, PEUGEOT 407, OPEL VECTRA , AUDI A4 B6 ....). The holder of the direction indicator bulbs in these cars has no power cables released. In such cars, connect the cube or wires supplying the lamp.Note, this type of lighting is not compatible with ECE. Only for off-road use. Traffic usage on public roads may be the reason for granting a ticket, retaining the registration certificate. Thanks to built-in CAN-BUS filters bulbs should work properly in cars equipped with this installation. UNLESS THE HIGH EFFICIENCY OF THE FILTER, THERE CAN EXCEPT EXCEPTIONS WHERE THIS FILTER DOES NOT HELP, IN THAT CASE, PLEASE CONTACT OUR COMPANY! Led daytime running lights in direction indicators PY21W, 2x for P21W) 2x resistors to fool the CAN-BUS installation The set includes the AUTOMAT module for free! PRODUCT DESCRIPTION: These diodes are mounted in the indicator bulb socket. Thanks to the use of two colors of LEDs on one bulb, an effect simulating daylight DRL (white LED) or indicator light (orange LED) was obtained. The daytime running lights are turned on automatically when the ignition key is turned on. The daytime running lights turn off when the dipped beam headlamps are turned on. Some cars have lamps with power supply to the indicator bulb integrated with the lamp (e.g. BMW, PEUGEOT 407, OPEL VECTRA, AUDI A4 B6 ... The lamp holder of the direction indicators bulbs in these cars does not have any exposed power cables. In such cars, it is necessary to connect to the ankle or wires supplying the power to the lamp. Note that this type of lighting is inconsistent with the ECE. For off-road use only. Use in traffic on public roads may be a reason for granting a fine, keeping the registration certificate. Thanks to the built-in CAN-BUS filters, the bulbs should work properly in cars equipped with this installation. DESPITE THE HIGH EFFICIENCY OF THE FILTER, EXCEPTIONS MAY HAPPEN WHERE THIS FILTER WILL NOT HELP, IN THIS CASE PLEASE CONTACT OUR COMPANY! Current consumption: 0.17A Light power: 271 lm / 271 lm Input voltage: 12V Resistor: 50W 6ΩJ CANBUS: Yes