Innovate ethanol sensor INN-3907

Universal ethanol sensor from Innovate Motorsports®. Ethanol Sensor for Innovate Motorsports Ethanol Advanced ™ Gauges, which also measures fuel temperature. These capabilities allow the user to monitor and record critical gauge data for accurate and reliable fine-tuning when working with high-ethanol fuel. Features: Reports ethanol content and fuel temperature. (not included) may be necessary for the successful installation of the sensor. The sensor can be installed on the supply or return line. Before disconnecting any fuel lines, depressurize the fuel system. The orientation of the flex fuel sensor is not important, it can be mounted in any direction. Check for fuel leaks before Universal Ethanol Content Sensor by Innovate Motorsports®. Ethanol content sensor for Ethanol Advanced ™ gauges by Innovate Motorsports that also measures fuel temperature. These capabilities allow the user to monitor and capture critical metrics for accurate and reliable tuning while operati ng with high ethanol content fuel.Features: Report both ethanol content and fuel temperature Fittings are 3/8 "SAE quick-disconnect male on both ends Additional fuel hose and adapters (not included) might be necessary to successfully install the sensor The sensor can be installed in the feed or return line Before disconnecting any fuel line connections make sure to depressurize the fuel system The orientation of the flex fuel sensor is not important, it can be mounted in any direction Check for fuel leaks and address them accordingly before driving the vehicle! 2-in-1 boost and AFR indicator. PowerSafe indicator has a DirectDigital O2 sensor that displays data on LED display. Combining AFR with boost indicator, you can set the "Boost cut" in the traditional way, depending on the pressure or using the AFR value depending on the degree of depletion In case the car has a nitro installation, PowerSafe technology will disable the nitro sensor in the target engine protection due to receiving data from several sensors Features: 52mm diameter does not require PC configuration configurable OLED display: boost, shift light, air / fuel ratio, afr or lambda, inHG, PSI, kPa, BAR 4 bar sensor with range operation from -29inHG to 43.5PSI (-1 to 3 BAR) programmable cut-off peak hold function sensors compatible with various types of fuels possibility to calibrate the O2 sensor possibility to control via an external computer compatible with Innovate MTS products LogWorksPC software included The set includes: PSB-1 ​​indicator O2 sensor 2.4m sensor cable 4 BAR Map Sensor relay 30A programming cable two front replaceable covers - black, silver and black and white instructions The AFR probe is not covered by the warranty.