Soft99 Nano Hard Clear 8ml (Coating for plastics) SO-FT-044

Nano Hard Clear is a durable coating that restores transparency and smoothness to transparent plastics such as headlight covers. The coating lasts up to 6 months. How to use: Remove dirt, oil and other dirt from the surface. Dry it completely. Put on the protective gloves provided and shake the bottle. We recommend covering the area around the surface to be cleaned. Apply the product on the included sponge, then spread it thinly and evenly. Let dry for 5 minutes, then wipe with clean microfiber. Do not touch or wet the surface for 24 hours. It restores the transparency and vivid color like a new car, when you apply this product on transparent resin parts such as headlights, winkers or car-visors which lost transparency by deterioration after they have been used for a long time. The effect of "Crystal blue Coating" makes yellowing transparent resin beautiful.Unlike the temporal lustering agents made of Silicone Oil or so on, it creates thin-film glass coating on the surface made of resin. Furthermore, the effect lasts for more than 6 months, at the same time at brings out high water repellency and prevents deterioration of resin itself.Directions: Remove dirt or oil completely in advance. If you use water to do, dry until no water drops remains. Wear the included gloves and shake the bottle well. Afterward, put the liquid on the included sponge and spread it evenly. Spread it evenly again with another clean sponge. Do not use the sponge which you already used. We recommend masking around the area that you will apply. Do not touch or wet the car for 24 hours after applying. And the coating film takes 3-4 days to harden completely.Nano Hard Clear is a durable coating that restores transparency and smoothness to transparent plastics such as headlight covers. The coating lasts up to 6 months. How to use: Remove dirt, oil and other dirt from the surface. Dry it completely. Put on the protective gloves provided and shake the bottle. We recommend covering the area around the surface to be cleaned. Apply the product on the included sponge, then spread it thinly and evenly. Let dry for 5 minutes, then wipe with clean microfiber. Do not touch or wet the surface for 24 hours. The coating needs 3-4 days to fully cure Dosage: 10-15 ml / 10L of water for daily care 50 ml / 10L of water for servicing ceramic coatings and removing weak waxes or sealants How to use: Rinse the car with water under pressure Make a working solution Wash the car from the top to bottom with a glove. Rinse the car thoroughly with water under pressure