Soft99 Nano Hard Plastic 8ml (Coating for plastics) SO-FT-043

Nano Hard Plastic regenerates faded and pale plastic parts of the car, creating a glossy coating that protects them for up to 6 months. The product can be used on elements that heat up, such as an engine cover (up to 300 ° C). Suitable for various types of plastic, best for black and gray colors. Transparent plastics must be treated with a different product. How to use: Remove dirt, oil and other dirt from the surface. Dry it completely. Put on the protective gloves provided and shake the bottle. We recommend covering the area around the surface to be cleaned. Apply the product on the included sponge, then spread it thinly and evenly. Apply a second layer using a new, clean sponge. Do not touch or wet the surface for 24 hours. By just applying on the whitening or color fading resin parts, it creates transparent glassy "Nano crystal coating" and ultimate shine lasts more than 6 months.You can use it on heated parts such as car or motorcycle's engine cover and silencer.Moreover, it is compatible with unpainted resin parts on car, motorcycle, home electric appliances and even office chair! Directions Remove dirt or oil completely in advance. If you use water to do, dry until no water drops remains. Take the liquid on the black side of included sponge and spread it evenly. Dry for 5 min, wipe off evenly with a dry clean towel. Do not use the sponge which you already used. Do not touch or wet the car for 24 hours after applying. The coating takes 3-4 days to harden completely.Nano Hard Plastic regenerates faded and faded plastic parts of a car, creating a glossy coating that protects them for up to 6 months. The product can be used on elements that heat up, such as an engine cover (up to 300 ° C). Suitable for various types of plastic, best for black and gray colors. Transparent plastics must be treated with a different product. How to use: Remove dirt, oil and other dirt from the surface. Dry it completely. Put on the protective gloves provided and shake the bottle. We recommend covering the area around the surface to be cleaned. Apply the product on the included sponge, then spread it thinly and evenly. Apply a second layer using a new, clean sponge. Do not touch or wet the surface for 24 hours. The coating needs 3-4 days for complete hardening.Dosage: 10-15 ml / 10L of water for daily care 50 ml / 10L of water for servicing ceramic coatings and removing weak waxes or sealants. top down using a glove. Rinse the car thoroughly with water under pressure