Big Brake Kit D2 Volvo S60 MK2 10 ~ UP Rear MN-FO-048

D2 Racing Big Brake Kit D2 VOLVO S60 MK2 Rear Year: 10 ~ UP Bolt Spacing: 5 X 108VL08-R D2 Racing's Big Brake Kits offer unmatched stopping power. The calipers are available in purple, black, yellow and red. The kit includes: 2 x ventilated discs with slots or holes, with aluminum bells (compatible with all separate OEM handbrake systems, drum, electric etc ...) 2 x forged, aluminum monoblock brake calipers 1 x set of brake pads to choose from: - Street (Resistant to temperatures up to 600 degrees) - Sports (Resistant to temperatures above 600 degrees) - Racing (Resistant to temperatures up to 1000 degrees) 2 x Braided brake lines All required mounting hardware ( brackets, screws, instructions etc.) Please note that the clamps will be larger than the standard ones and refer to the table below before selecting the clamps Minimum wheel size (inch) Disc size (mm) 15 286 16 304 17 330 18 356 19 380 20 400 Differences between a slotted and drilled brake disc: Slotted: Slotted brake discs typically feature small recesses (four to eight evenly spaced), milled on the surface of the brake disc. The grooves provide the same cooling benefits as the holes, but with a lower risk of separation and formation of gaps because the grooves do not usually extend over the entire surface of the rotor (although such models are available on the market today). The grooves are usually oriented and bent in this way. that they can cover the entire surface of the brake pads, providing much better ventilation than a series of holes. Some types of cuts can be used to judge the condition of the brake disc. The grooves also have a 'shave' effect that keeps the brake pad surface cleaner for better vapor contact. In addition, the presence of notches works like a grater, increasing the car's braking efficiency, while being aware that pad wear increases. In order to avoid quick abrasion, it is recommended to select high-quality pads for such discs. Drilled: Drilling 30 to 40 evenly spaced holes in the brake discs improves air ventilation and the cooling effect. The holes have indeed brought an unexpected benefit. They created channels for the extraction of hot gases emitted by the brake pads. Phenolic resins, which are used as a binder to bond the brake pads, emit steam when overheated. The gas can form a boundary layer between the pads and the brake disc, which reduces friction. In our case, the boundary layer of gas between the surface of the pads and the brake disc prevents the pads from contacting the brake disc, reducing friction and braking force, just at this point. when the driver needs it most. If the brake disc is perforated or has cuts, holes or grooves separating the boundary layer and allowing gas to escape, then the pads can make full contact with the brake discs. In addition, the holes and grooves help remove dust and dirt that enters the space between the brake disc and the brake pads. At a microscopic level, the dirt between the brake pads and the brake disc can reduce the contact area of ​​the steam. Naturally, this also lowers the friction and efficiency of the equipment. Therefore, the vents, helping to remove dust and dirt, provide the blocks with the ability to maintain maximum surface contact. D2 Racing calipers are machine-made from aircraft-grade aluminum, and the pistons mounted in them have a very high temperature resistance (tested to 1000 degrees Celsius). D2 Racing has managed to maintain a low caliper weight while providing a significant improvement in braking force. Carbon D2 logo. (5-year leakage and 10-year crack and deformation warranty) Big Brake Kit D2 have TUV and ISO9001 Big Brake Kit D2 VOLVO S60 MK2 RearYear: 10 ~ UPPCD: 5 X 108VL08-R D2 Racing Big Brake Kits offer unparalleled braking power. In our offer you will find sets for the front and rear of the car with diameters of discs from 286mm to 421mm, 4-8 piston aluminum calipers The terminals are available in purple, black, yellow and red. Kit contents Each kit includes: 2 x vented discs, slotted or drilled, with aluminum bells (compatible with all separate OEM handbrake systems, drum, electric etc ...) 2 x forged, monoblock aluminum brake calipers1 x set of brake pads- Street-Sport (+156 euro ) -Racing (+156 euro) 2 x braided brake hosesAll required mounting components (brackets, bolts, instructions etc) Minimum wheel diameter (inches) Disc diameter (mm) 15 286 16 304 17 330 18 356 19 380 20 400 Slloted or Drilled pad disc D2 Racing clamps are machine made of aviation grade aluminum, a nd the pistons mounted in them have very high temperature resistance (tested up to 1000 degrees Celsius). D2 Racing has managed to keep the weight of the clamp at the same time while providing significant improvement in braking power. D2 logo. (5-year leakage warranty and 10-year warranty for cracks and deformation) Big Brake Kit D2 haveTUV ISO9001