Soft99 Iron Terminator 500ml (Rim cleaner) SO-FT-036

Iron Terminator will deal with the most persistent metallic dirt, causing a spectacular bleeding effect. Due to the balanced pH it is safe for all rims, including aluminum, polished and multi-part rims. Does not react with the body surface and does not pose a threat to the paintwork. Iron Terminator removes dust from brake pads, volatile rust and all metal particles. The effectiveness combined with a non-irritating smell ensures unparalleled comfort of work. How to use: Shake the bottle and turn the atomizer to the ON position Apply the agent to the cleaned surface from a distance of approx. 10 cm. Remember that the surface to be cleaned must be cool. Apply Iron terminator in a shaded place. Leave the Iron Terminator on for a few minutes. In the case of stronger dirt, support the effect of the preparation with a sponge or a soft brush. Rinse the cleaned surface thoroughly with water under pressure. Repeat steps 1 to 4 as necessary. Strong fallout remover exclusively develop for aluminum wheel.Special active agent and ammonium thioglycolate synergistic effect thoroughly remove the stubborn iron deposit which normal car wash cannot.In special this product is highly effective for stucked ferrous deposit. Quick color change shows clearly where the product is activated.PH-balanced (pH-7) formula without abrasive particles, friendly to aluminum wheel and human.Directions Wash off sand, mud or dust in advance. Shake the bottle well approx. 20 times, and turn the trigger "ON". Spray entirely 10cm away. Allow to dwell for 2-3 minutes after that rub lightly with soft long bristle brush to remove dirt. The transparent liquid change the color into purple when there is iron deposit. Rinse thoroughly with plenty of water. Wipe off with clean towel. Besure to do braking test by low gear 2-3 times after cleaning. Do not rub strongly to avoid making scratches. When spray over brake disc, it reacts and changes the color. Rinse away completely, if leave as it is, it might be bad effect for brake disc.Iron Terminator will deal with the most stubborn dirt of metallic origin, causing a spectacular bleeding effect. It does not react with the surface of the body and does not pose a threat to the paintwork. The Iron Terminator removes brake pad dust, volatile rust and all metal particles. The effectiveness combined with a non-irritating smell ensures unparalleled comfort. ON Apply the agent to the surface to be cleaned from a distance of approx. 10 cm. Remember that the surface to be cleaned must be cool. Apply Iron terminator in a shaded place. Leave the Iron Terminator on for a few minutes. In the case of stronger dirt, support the effect of the preparation with a sponge or a soft brush. Rinse the cleaned surface thoroughly with water under pressure. If necessary, repeat points 1 to 4 Dosage: 10-15 ml / 10L of water for daily care 50 ml / 10L of water for servicing ceramic coatings and removing weak waxes or sealants How to use: Rinse the car with water under pressure Make a working solution Wash the car from top to bottom bottom with a glove. Rinse the car thoroughly with water under pressure