Soft99 Wheel Dust Blocker 200ml (Hydrophobic coating for rims) SO-FT-039

The coating creates an extremely durable hydrophobic layer on the surface of the rims, which prevents the adhesion of dirt, such as volatile rust or brake sludge. How it works? Everything comes from nature! The mixture of lotus leaf particles and the most advanced Japanese chemistry will protect your rims. The kit includes 8 special cloths to help prepare the surface before application. How to use: Wash the rims thoroughly to remove dirt. Shake the can and spray on the rims from a distance of 10 cm. Don't rub! Leave to dry for 20 minutes at 30 ° C or 60 minutes at 10 ° C. There may be a white deposit or streaks on the surface immediately after spraying. Both of these effects will fade during drying out. This coating agent creates super hydrophobic layer onto wheel surface, prevents brake dust adhesion and keeps beautiful condition for a long time.Nano size lotus leaf coating agent prevents adhering water, brake dust and dramatically repells the dirt.Only you have to do is wash wheels, wipe off water, remove oily component with included wipes, then spray and dry. 8 wheels are available to apply in 1 bottle.Directions Remove wheel dirt with detergent and wipe off water.Then wipe off with included wipe to remove the dirt onto wheel surface completely. Shake the bottle well and spray 10cm away from wheel. Complete without wiping off. Dry 20min in summer (30 ℃), 60min in winter (10 ℃) Do not drive until it gets dry Just after spraying, surface gets whiten or liquid streak looks unevenness, this symptom would disappear after time goes by. (If splay large amount, it remain whiten) Liquid may accumulated at the bottom of tires, in case wipe off with wrung towel before dry it. If liquid attaches other area, wipe off as well. The coating creates an extremely durable hydrophobic layer on the surface of the rims, which prevents dirt such as volatile rust and brake sludge from sticking in. How it works? Everything comes from nature! The mixture of lotus leaf particles and the most advanced Japanese chemistry will protect your rims. The kit includes 8 special cloths to help prepare the surface before application. How to use: Wash the rims thoroughly to remove dirt. Shake the can and spray on the rims from a distance of 10 cm. Don't rub! Leave to dry for 20 minutes at 30 ° C or 60 minutes at 10 ° C. There may be a white deposit or streaks on the surface immediately after spraying. Both these effects will disappear during drying.Dosage: 10-15 ml / 10L of water for daily care 50 ml / 10L of water for servicing ceramic coatings and removing weak waxes or sealants How to use: Rinse the car with water under pressure Make a working solution Wash the car from top to bottom with a glove Rinse the car thoroughly with water under pressure