Menu
Bolted spacers 22mm 70.1mm 5x115
  • Bolted spacers 22mm 70.1mm 5x115
  • Bolted spacers 22mm 70.1mm 5x115

Bolted spacers 22mm 70.1mm 5x115 DM-314

kr 1,704.88
Inklusive MVA
Mengde
5 % rabatt på første kjøp for registrerte kunder
0

Tilgjengelig
 

Sikkerhetspolitikk

 

Leveringspolicy

 

Butikkregler

The price applies to a set for one axle without bolts fixing the spacers to the hubs Spacers screwed to the hub with a thickness of 20mm on the side with the centering flange Product description: material - PA6 duralumin type of thread - M12x1.5 oxide steel sleeves depending on the car model spacer thickness - 22mm per side (44mm per axle) hole / flange diameter - 70.1mm hole spacing - 5x115mm bolts: bolt hardness 10.9 Spacers fit: Chevrolet Captiva Chevrolet Cruze (5x115) Chevrolet Orlando Our spacers are made of a PA6 duralumin shaft, making them very durable and light at the same time, and thanks to the use of two-stage steel bushings with a thread, the thread cannot break, as in the case of distances in which the threads are made of aluminum. Both the hole and the centering flange are created with a tolerance of 0.05 mm, which ensures accurate centering wheel and prevents vibrations on the steering wheel, which occur when the rim is not well aligned. The cane is also made of duralumin with pressed-in knurled pins or steel threaded bushes to prevent thread breakage. Both the studs and the sleeves are protected against pulling them out when tightening the wheel due to their two-stage shape. The advantage of the spacers is the increase in the track width, thanks to which the car behaves better when cornering, and also looks better because the wheels are not hidden in the fenders. using spacers, we can install rims with other parameters such as greater offset (ET), because we eliminate the difference through spacers. You can also use spacers that change the spacing of the bolts, which allows you to install rims from another car with the same number of mounting bolts. The price applies to a set for one axle without screws securing the spacers to the hubs. product: material - PA6 duralumin thread type - M14x1.5 or M12x1.5 oxidized steel bushes depending on the car model spacer thickness - 20mm per side (40mm per axis) hole / flange diameter - 72.6mm hole spacing - 5x120mm bolts: screw hardness 10.9The spacers fit: Our spacers are made of a PA6 duralumin shaft, which makes them very durable and light at the same time, and thanks to the use of two-stage steel threaded bushings, it is impossible to break the thread, as in the case of spacers in which the threads are made of aluminum. Both the hole and the centering flange are created to a tolerance of 0.05 mm, which ensures accurate centering of the wheel and prevents vibrations on the handlebars, which appear when the rim is not well aligned. Bolt-on spacers are also made of duralumin with pressed-in knurled pins or steel threaded bushes to prevent thread breakage. Both the studs and the sleeves are protected against pulling them out when tightening the wheel due to their two-stage shape. The advantage of the spacers is the increase in the track width, thanks to which the car behaves better when cornering, and also looks better because the wheels are not hidden in the fenders. using spacers, we can install rims with other parameters such as greater offset (ET), because we eliminate the difference through spacers. You can also use spacers that change the spacing of the bolts, which allows you to install rims from another car with the same number of mounting bolts.
SLIDE
DM-314

MTuning Sp. z o.o.
Morgowa 85a
35-323 Rzeszów
POLEN
butikk@mtuning.pl

Kommentarer (0)
Ingen kundeanmeldelser enda.