Strengthening the front cups e46 RS-UL-039

The offered strengthening of the front sockets have been designed for the BMW E46 model. They were designed to stiffen the elements that transfer the highest loads during the operation of the front suspension, which can bend during dynamic driving or taking sharp turns, changing the geometry of the vehicle. Thanks to welding in our set, the sensitive elements are not only strengthened, but also effectively eliminate the "floating" of the front cups, which additionally translates into better driving properties of the E46 model. The reinforcements also effectively prevent knocking out of the curves when hitting unevenness or cavities in the road. The sheets have a special finish of the front part in the form of a double folded sheet 180 degrees for even better reinforcement of these elements. The tiles have cut holes in a unique shape, which further enhance the visual effect and give a sporty character.The elements have been designed in such a way that they can be welded in without any additional modifications to the sockets or aprons of the front wheel arches, at the same time allowing the installation of all original elements and provide access to the wiring harness both on the left and right side of the vehicle. The plates have the largest possible support surface, and thus the forces acting on the sensitive elements are transferred to the adjacent walls. The product is intended both for civilian cars which, due to the passage of time, require stiffening of the original elements, as well as for tuning purposes to prevent them from becoming damaged. damage during intensive use in sports driving or Drift, KJS, 1 / 4mili, Time Attack, etc. steel S355, 2 [mm] thick steel, raw welding The set includes: 2 reinforcement plates Front sockets reinforcements dedicated to: BMW E46 Sedan BMW E46 Coupe BMW E46 Convertible BMW E46 Estate BMW E46 Compact