-
E-post: post@tuningdel.com
-
Telefon: +4796726648
-
Bremsesystem
-
Dekk og felger
-
Dingser
-
Drivstoffsystem
-
Eksosanlegg
-
Eksternt Tilbehør
-
For Sjåføren
-
Innredning
-
Inntakssystem
-
Kjemi, Detaljering
-
Kjølesystem
-
Kjøresystem
-
Klemmer, Klemmer
-
Klokker
-
Motor
-
Nitrogenoksid
-
Rør, Albuer
-
Seter Og Belter
-
Silikon Kontakter
-
Spoilering
-
Suspensjon
-
Turbo
-
Varmeisolasjon
Menu
-
MenuTilbake
-
Eksternt Tilbehør
-
-
Kjemi, detaljering
-
-
Bremsesystem
-
-
Dekk og felger
-
-
Dingser
-
-
Drivstoffsystem
-
-
Eksosanlegg
-
-
For Sjåføren
-
-
Innredning
-
-
Inntakssystem
-
-
Kjølesystem
-
-
Kjøresystem
-
-
Klemmer, Klemmer
-
-
Klokker
-
-
Motor
-
-
Nitrogenoksid
-
-
Rør, Albuer
-
-
Seter Og Belter
-
-
Silikon Kontakter
-
-
Spoilering
-
-
Suspensjon
-
-
Turbo
-
-
Varmeisolasjon
-
COLOURLOCK Grundierung 50ml (Primer for paint) CO-LO-016
kr 82.92
Inklusive MVA
Sikkerhetspolitikk
Leveringspolicy
Butikkregler
The primer is the binder between the backing layer of leather and paint. It penetrates deep into the skin, is responsible for a very good adhesion of paints, it is soft to the touch itself and significantly reduces paint consumption, which significantly improves the touch of the skin. Application Before priming, the skin must always be cleaned. According to the instructions and depending on the type of leather, the primer must be properly dosed. Spray the skin with primer under low pressure (approx. 2 bar) using the cross technology until the surface is not sticky after drying. The priming material can also be applied with a brush, which The ground is a binder that joins the bottom layer with the skin and paint. It penetrates deep into the skin, it is responsible for very good adhesion of paints, it is soft to the touch and significantly reduces paint consumption, which significantly improves skin feel.Application Before pricking, the skin must always be cleaned. According to the instructions, and depending on the skin type, the primer must be properly dosed.We spray the skin with low pressure (about 2 bars) in cross technology until the surface after drying is not sticky The primer can also be applied with a brush, which improves the effect of renovation works carried out with the use of Filler or Neutral paint. It penetrates deeply into the skin, is responsible for a very good adhesion of paints, it is soft to the touch itself and significantly reduces paint consumption, which significantly improves the touch of the skin. Application Before priming, the skin must always be cleaned. According to the instructions and depending on the type of leather, the primer must be properly dosed. Spray the skin with primer under low pressure (approx. 2 bar) using the cross technology until the surface is not sticky after drying. The priming material can also be applied with a brush, which improves the effect of renovation works carried out with Filler or Neutral paint.
Kommentarer (0)
Ingen kundeanmeldelser enda.
Din tilbakemelding på anmeldelsen kan ikke sendes inn
Rapporter kommentar
Er du sikker på at du vil rapportere denne kommentaren?
Rapporten er sendt
Din kommentar er sendt inn og vil bli vurdert av en moderator.
Din rapport kunne ikke sendes inn
Skriv din omtale
Anmeldelse sendt inn
Kommentaren din har blitt lagt til, og vil være tilgjengelig når den har blitt godkjent av en moderator.