Soft99 Glaco Blave 100ml (Hydrophobic coating) SO-FT-058

The first Glaco product in history that protects not only windows, but also transparent plastic elements, such as headlamp covers or lenses for helmets and goggles. Specially shaped applicator and attached microfiber are very helpful in application. The hydrophobic coating smoothes the surface, helping the water to flow freely under the influx of air. If you are enthusiast of two-wheelers, this product will surely meet your expectations! pH, drying, disinfecting the surface using clays, cleaners or other similar products. Glaco products achieve the best results when the glass is cleaned with Glass Compound Z or the Glaco range of cleaners. Before application, make sure that the surface of the glass or plastic element is dry! The product can cause damage if it is applied on a wet surface! Remove the cap and apply the product directly to the surface. The first ever glaco, provide strong water repellent for glass and plastics. Water repellent component links tightly against invisible uneven surface.Produce water repellency not only for glass but also for clear plastics such as headlight cover, side visor, tail lamp cover, helmet shield and goggles.Ensure clear visibility for driver and rider driving in rain. No need to wait for dry, quick application process. Once apply and wipe, produce water repellent power immediately.Directions Rinse off dirt or dust before use. No need to wait for drying. Wipe off immediately before liquid gets dry. Take off the cap and apply directly. Directly apply because it attaches felt applicator. Quick application without getting dirty your hand. Apply gently full coverage. If remain unevenness area, it cannot produce original performance. Apply firmly without making gap. Immediately wipe off with included towel. (Dry condition) The first Glaco product in history that protects not only windows, but also transparent plastic elements, such as headlight covers or lenses for helmets and goggles. Specially shaped applicator and attached microfiber are very helpful in application. The hydrophobic coating smoothes the surface, helping the water to flow freely under the influx of air. If you are enthusiast of two-wheelers, this product will surely meet your expectations! pH, drying, disinfecting the surface using clays, cleaners or other similar products. Glaco products achieve the best results when the glass is cleaned with Glass Compound Z or the Glaco range of cleaners. Before application, make sure that the surface of the glass or plastic element is dry! The product can cause damage if it is applied on a wet surface! Remove the cap and apply the product directly to the surface. Immediately wipe the product off the surface after its application with the supplied microfiber Dosage: 10-15 ml / 10L of water for daily care 50 ml / 10L of water for servicing ceramic coatings and removing weak waxes or sealants How to use: Rinse the car with water under pressure Make a working solution Wash the car from top to bottom with a glove. Rinse the car thoroughly with water under pressure