Elbow 45st D1Spec Black 12mm XL DS-DS-424

45 ° XL elbow by D1Spec, a reinforced element with a 4-fold braid, with a wall thickness of 4 mm, tested up to 7 bar and in the temperature range from -50 to + 260 ° C. Made of the highest quality silicone, resistant to all kinds of oils, greases, etc. Thanks to these parameters, it is perfect for tuning the installation of intercoolers, including the intake. Dimensions: D1 = 12mm D2 = 12mm L = 200mm Our offer also includes mounting bands : Table of clamp sizes Diameter of silicone SGB band GBS band T-Clamp 10mm 17-19 12mm 19-21 19-29 15mm 22-24 22-32 18mm 25-27 25-38 20mm 25-38 25mm 25-38 28mm 32- 44 30mm 32-44 37-42 32mm 32-44 37-42 35mm 35-51 43-49 38mm 35-51 43-49 40mm 35-51 47-55 45mm 38-57 47-55 51mm 44-64 54-62 57mm 51-70 60-68 60mm 64-76 67-75 63mm 64-76 67-75 67mm 70-89 73-81 70mm 70-89 73-81 76mm 70-89 79-87 80mm 76-92 86-94 84mm 80-100 89-99 89mm 90-110 89-99 102mm 90-110 105-113 Elbow 45 ° XL by TurboWorks, four time braided, with a 4mm wall thickness, tested up to 7 bar in tepmerature range -50 to +260 ° C. Made of highest quality silicone, resistant for all kinds of oils and greases. Perfect for tuned cars, used to create intercoolers pipings, air intakes, and cooling systems. Dimensions: D1 = 12mm D2 = 12mm L = 200mm Hight quality clamps are also availible in our offer: Clamp size chart: Silicone diameter SGB Clamp GBS Clamp T -Clamp 10mm 17-19 12mm 19-21 19-29 15mm 22-24 22-32 18mm 25-27 25-38 20mm 25-38 25mm 25-38 28mm 32-44 30mm 32-44 37-42 32mm 32-44 37-42 35mm 35-51 43-49 38mm 35-51 43-49 40mm 35-51 47-55 45mm 38-57 47-55 51mm 44-64 54-62 57mm 51-70 60-68 60mm 64-76 67 -75 63mm 64-76 67-75 67mm 70-89 73-81 70mm 70-89 73-81 76mm 70-89 79-87 80mm 76-92 86-94 84mm 80-100 89-99 89mm 90-110 89- 99 102mm 90-110 105-113 D1Spec 45 ° XL elbow, 4-fold reinforced element, 5mm wall thickness, tested up to 7 bar and temperature range from -50 to +260 degrees C. Made of the highest quality silicone , resistant to all kinds of oils, greases, etc. Thanks to these parameters, it is perfect for tuning, assembly and ntercoolers, also inlet Dimensions: D1 = 12mm D2 = 12mm L = 200mm