Soft99 Cloth Barrier Fabric Coat 170ml (Hydrophobic coating) SO-FT-045

Famous Fusso polymers on upholstery? Why not! Create a water-repellent coating on textile elements that have been a dirt magnet so far! All you need to do is spray the product on the surface and spread it with the included sponge. How to use: Wash or wash the upholstered element. If the temperature in the room and inside is below 10 ° C, raise it. Shake the bottle and unlock the atomizer. Spray from a distance of about 20 cm, covering the surface evenly. We recommend 12 to 15 sprays per seat. Let dry 2 to 4 hours depending on the temperature. This is coated agent for prevent fabric seat from dirt.Just spray and spread with sponge, special fluorine (fusso) polymer creates the layer.It can protect not only for water based stain but also oily stain the main cause of stain or odor.This high abrasion resistance works approx 3 months.Directions * In case of the seat gets dirty, wipe with wrung towel and dry for a while. (Do not use cleaner.) * If low temperature below 10 ℃, warm the inside of car by air conditioner in advance. 1. Shake the bottle well and turn the trigger. 2. Spray 20cm away from fabric seat, moisten entirely. To prevent unevenness, extend with included sponge. * Moderate amount for 1 seat is 12-15 shots. * Wipe off with towel immediately when adhere expecting for seat. 3. Enough to dry. (In summer: 2 hours, In winter: 4 hours) * If you spray too much, it may take long time for dry. In this case dry with dryer. (beware not to damaged material.) * In case of attached dirt, do not leave, wipe off immediately. * If you use repeatedly, enhance anti-foul effect. Recommend to use once in 3 months. The famous Fusso polymers on upholstery? Why not! Create a water-repellent coating on textile elements that have been a dirt magnet so far! All you need to do is spray the product on the surface and spread it with the included sponge. How to use: Wash or wash the upholstered element. If the temperature in the room and inside is below 10 ° C, raise it. Shake the bottle and unlock the atomizer. Spray from a distance of about 20 cm, covering the surface evenly. We recommend 12 to 15 sprays per seat. Leave to dry for 2 to 4 hours depending on the temperature Dosage: 10-15 ml / 10L of water for daily care 50 ml / 10L of water for servicing ceramic coatings and removing weak waxes or sealants How to use: Rinse the car with water under pressure Make a working solution Wash car from top to bottom with a glove. Rinse the car thoroughly with water under pressure