Soft99 Glass Compound Z 100ml (Glass cleaner) SO-FT-029

The product is recommended for the proper preparation of the glass before the application of Glaco series hydrophobic coatings. Sterilizes the glass, removing dirt and residues of previously protecting glass. Glass Compound Z consists of microscopic abrasive particles that gradually penetrate and remove dirt. A special applicator is attached to the package. neutral pH and drying. Shake the bottle well and apply a small amount of liquid to the included sponge. Polish the glass surface with cross movements. Rinse surfaces with water after process completion. Two types of compound combined to easily break down and remove traffic film, glass coatings, oily dirt, and other stains from glass. Includes a hand sponge.Directions Remove dust and dirt from glass with water, and wipe off any water drops remaining on the surface. Shake the bottle well. Put the liquid on the gray side of the sponge and polish until the surface doesn't repel the liquid anymore. Cleanly wash off the glass surface Product recommended for the proper preparation of the glass before the application of the Glaco series hydrophobic coatings. Sterilizes the glass, removing dirt and residues of previously protecting glass. Glass Compound Z consists of microscopic abrasive particles that gradually penetrate and remove dirt. A special applicator is attached to the package. neutral pH and drying. Shake the bottle well and apply a small amount of liquid to the included sponge. Polish the glass surface with cross movements. Rinse the surfaces with water after the process is finished Dosage: 10-15 ml / 10L of water for daily care 50 ml / 10L of water for servicing ceramic coatings and removing weak waxes or sealants How to use: Rinse the car with water under pressure Make a working solution Wash the car from top to bottom with a glove Rinse the car thoroughly with water under pressure