Parking sensor - RD037x8 OS-LE-010

Precise parking sensor - 8 sensors Set includes 8 sensors - 4 front and 4 rear Color LCD display with built-in buzzer Control unit Wiring Drill with hole saw Clamps and double-sided plaster Assembly instructions Receipt or VAT invoice The sensor indicates the distance from an obstacle by indicating the side on the display there is an obstacle, and the actual distances in centimeters, additionally, the distance from the obstacle is signaled by sounds (only in the case of reversing). The front sensors work for approx. 10 seconds after pressing the brake - if there is an obstacle in front of the car, if there is no obstacle, the system will not activate. When reversing, the rear sensors are activated, and the front ones are automatically disconnected. Sensor operation: The distance to an obstacle is signaled by sounds. The sensors activate automatically when reversing. Distance to the obstacle 200 - 120 cm: No sound signal. Distance to the obstacle 120 - 80 cm: Rear sensors - intermittent sound at larger intervals: Pi ........ Pi ......... Pi Distance to the obstacle 80 - 50 cm: Rear sensors - intermittent sound in smaller intervals: Pi .... Pi .... Pi .... Pi Distance to the obstacle 50 - 30 cm: Rear sensors - intermittent sound in smaller intervals: Pi.Pi.Pi.Pi.Pi.Pi.Pi Parameters Technical: Power supply: 12V DC Power Consumption: Device operating temperature: -30 ° C to +70 ° C Ultrasonic frequency (sensors): 40 KHz Display indications: 3.0 m to 0.3 m Measurement error: +/- 5cm Permissible bumper inclination angle: +/- 5 ° Sensor diameter: 21.5 mmDisplay dimensions: 9.9cm wide, 1.9cm high, 2.6cm thick Precision parking sensor - 8 sensorsSet contains: 8 sensors - 4 front and 4 rear Color LCD display with built-in buzzer Control unit Wiring Drill with a hole saw Cufflinks and two-sided patch Installation instructions Receipt or VAT invoice The sensor signals the distance from the obstacle by showing lines on th e display the side on which the obstacle is located, and the actual distances in centimeters, in addition the distance from the obstacle is signaled by sounds (only when reversing). The front sensors work for approx. 10 seconds after the brake is depressed - if there is an obstacle in front of the car, if there is no obstacle, the system will not turn on. When reversing, the rear sensors are activated and the front sensors are automatically disconnected. Sensor operation: Distance from the obstacle is signaled by sounds. Sensors are automatically activated when reversing. Distance to obstacle 200 - 120 cm: No sound signaling. Distance to obstacle 120 - 80 cm: Rear sensors - intermittent sound in larger increments: Pi ........ Pi ......... Pi Distance to obstacle 80 - 50 cm: Rear sensors - intermittent sound at smaller intervals: Pi .... Pi .... Pi .... Pi Distance to obstacle 50 - 30 cm: Rear sensors - intermittent sound at smaller intervals: Pi.Pi.Pi.Pi.Pi.Pi.PiTechnical parameters: Power supply: 12V DC Power consumption: Working temperature of the device: -30 ° C to + 70 ° C Ultrasonic frequency (sensors): 40 KHz Display indication: 3.0 m to 0.3 m Measurement error: +/- 5cm Permissible angle of inclination of the bumper: +/- 5 ° Sensor diameter: 21.5 mm Dimensions of the display: Width 9.9 cm, height 1.9 cm, thickness 2.6 cm Precise parking sensor - 8 sensors Kit includes 8 sensors - 4 front and 4 rear Color LCD with built-in buzzer Control unit Wiring Drill with hole saw Clamps and double-sided plaster Assembly instructions Receipt or VAT invoice Sensor signals distance The distance from the obstacle by indicating the side of the obstacle with lines on the display and the actual distances in centimeters, additionally, the distance from the obstacle is signaled by sounds (only in the case of reversing). The front sensors work for approx. 10 seconds after pressing the brake - if there is an obstacle in front of the car, if there is no obstacle, the system will not activate. When reversing, the rear sensors are activated, and the front ones are automatically disconnected. Sensor operation: The distance to an obstacle is signaled by sounds. The sensors activate automatically when reversing. Distance to the obstacle 200 - 120 cm: No sound signal. Distance to the obstacle 120 - 80 cm: Rear sensors - intermittent sound at larger intervals: Pi ........ Pi ......... Pi Distance to the obstacle 80 - 50 cm: Rear sensors - intermittent sound in smaller intervals: Pi .... Pi .... Pi .... Pi Distance to the obstacle 50 - 30 cm: Rear sensors - intermittent sound in smaller intervals: Pi.Pi.Pi.Pi.Pi.Pi.Pi Parameters Technical: Power supply: 12V DC Power Consumption: Device operating temperature: -30 ° C to +70 ° C Ultrasonic frequency (sensors): 40 KHz Display indications: 3.0 m to 0.3 m Measurement error: +/- 5cm Permissible bumper inclination angle: +/- 5 ° Sensor diameter: 21.5 mm Display dimensions: width 9.9 cm, height 1.9 cm, thickness 2.6 cm