Dunlop / Rubena cushion 150/2 DR-MT-021

2-snowman Rubena air spring 6 "Manufacturer: Ruben and Ruben for Dunlop 6 inches = approx. 15 cm in diameter For use in air-ride suspensions for heavier vehicles. If space permits, it is worth using at least on the axle where the vehicle has an engine. Higher load capacity than 130 cushions, so there is no need to inflate as much pressure as in the case of smaller ones. Technical data: Diameter of the pillow at rest: approx. 153 mm Maximum possible width after inflation: 168 mm Approximate min - max cushion height: approx. 70 - 200 mm Maximum working pressure - 8 bar Cushion height 130mm6 "Bag6" = about 15cm diameterRubber bag which can be used in air-ride systems. To put it on the shock absorber it needs to has additional mounting bracket.Features: Diameter when is without air about 153mm Max diameter when max pressure loaded about 168mm Min - max height: about 70 - 200mm Max working pressure - 8 bars Height of bag 130mm 2-snowman air spring by Rubena 6 "with a reinforcement ring between the chambersManufacturer: Ruben and Ruben for Dunlop 6 inches = approx. 15 cm in diameter For use in air-ride suspensions for heavier vehicles. If space allows it, it should be used at least on the axle where the vehicle has an engine. Higher load capacity than 130 cushions, so there is no need to inflate as much pressure as in the case of smaller ones. Technical data: Diameter of the pillow at rest: approx. 153 mm Maximum possible width after inflation: 168 mm Approximate min - max cushion height: approx. 70 - 200 mm Maximum working pressure - 8 bar Cushion height 130mm