Manifold plugs 1.9 CTDI JTDM Z19DTH 19mm MT-EG-070

Z19DTH collector end caps set Material: PA6 aluminum The most common failure of the vortex flaps in Z19DTH engines is damage, unsealing of the flap, or damage to the control rod of the swirl flaps at the connection of the rod with the flap. The plastic connecting the damper with the control rod is made or broken. Symptoms of this failure are the separation of the tie rod from the swirl flaps. As a consequence, it may result in increased fuel consumption, smoking, power loss, which is strongly felt especially in the lower range, until the turbocharger is turned on. General assembly rules The repair kit consists of high-quality aluminum swirl flap end caps with BONDLOC sealant necessary for proper assembly. The assembly consists in removing the swirl flaps with the damper control rod. We only leave the cable drive. Then press the plugs lubricated with the sealant included in the set into the holes. As a result, we get a very strong seal, larger than required. APPLICATION LIST: Alfa Romeo - 939A200 (1.9 MultiJet JTDM 16V 110 kW / 150 KM) 147 - 1.9 JTDM 8v 2005+ [120 KM] 147 - 1.9 JTDM 16v 2005+ [ KM 150] 147 - 1.9 JTD 16v 2004+ [KM 136] 156 - 1.9 JTD 2003-2005 [KM 126] 156 - 1.9 JTD 2004-2005 [KM 150] 156 Sportwagon - 1.9 JTD 16v Q4 2004-2006 [KM 150] 156 Sportwagon - 1.9 JTD 2005-2006 [KM 150] 156 Sportwagon - 1.9 JTD 2003-2006 [KM 126] 159 Saloon - 1.9 JTDM 8v 2005+ [KM 120] 159 Saloon - 1.9 JTDM 8v 2005+ [KM 115] 159 Saloon - 1.9 JTDM 16v 2005+ [KM 136] 159 Sportwagon - 1.9 JTDM 8v 2006+ [KM 120] 159 Sportwagon - 1.9 JTDM 8v 2006+ [KM 115] GT - 1.9 JTD 2003+ [KM 150] Fiat - M91 and M92 engines Croma - 1.9 D Multijet 2005+ [KM 150] Stilo - 1.9 D Multijet 2005+ [KM 150] Stilo Multi Wagon - 1.9 D Multijet 2005+ [KM 150] Opel / Vauxhall - Z19DTH and Z19DTJ Astra Mk V (H) engines - 1.9 CDTi 2004-2009 [KM 150] Astra Mk V (H) - 1.9 CDTi 2004-2009 [KM 120] Astra Mk V (H) Estate - 1.9 CDTi 2004-2009 [KM 150] Astra Mk V (H) Sports Hatch - 1.9 CDTi 2004-2010 [KM 150] Astra TwinTop Mk V (H) - 1.9 CDTi 2006+ [KM 150] Astravan ( H) - 1.9 CDTi 2005+ [KM 150] Signum - 1.9 CDTi 16v 2004-2008 [KM 150] Vectra MK II (C) - 1.9 CDTi 16v 2004-2005 [KM 150] Vectra MK II (C) GTS - 1.9 CDTi 16v 2004-2005 [KM 150] Vectra MK II (C) Estate - 1.9 CDTi 16v 2004-2005 [KM 150] Zafira MK II (B) - 1.9 CDTi 2005-2011 [KM 150] Saab - Z19DTH & Z19DTJ 9- Engines 3 Saloon - 1.9 TiD 2004+ [KM 150] 9-3 Convertible - 1.9 TiD 2006+ [KM 150] 9-5 Saloon - 1.9 TiD 2006+ [KM 150] 9-5 Estate - 1.9 TiD 2006+ [KM 150] NOTES: The kit fits the original Pierburg intake manifolds Part number - 93179055 55206459 55182684 GM - 55210201 Fiat, Alfa Romeo 939A2000 (1.9 Multijet 16V, 110kW / 150KM) Part number - 93179055 55206459 55182684 GM - 55210201 Z19DTH6 Collector End Cap Kit. The most common failure of swirl flaps in Z19DTH engines is damage, unsealing of class apes, or damage to the control rod of the vortex flaps at the connection point of the rod to the flap. The plastic connecting the damper with the control rod is made or broken. Symptoms of this failure are the separation of the tie rod from the swirl flaps. As a consequence, it may result in increased fuel consumption, smoke, power loss, which is strongly felt especially in the lower range, until the turbocharger is turned on. for correct installation - The installation consists in removing the swirl flaps with the damper control rod. We only leave the cable drive. Then press the plugs lubricated with the sealant included in the set into the holes. As a result, we get a very strong seal, larger than required. APPLICATION LIST: Alfa Romeo - 939A200 (1.9 MultiJet JTDM 16V 110 kW / 150 KM) 147 - 1.9 JTDM 8v 2005+ [120 KM] 147 - 1.9 JTDM 16v 2005+ [ KM 150] 147 - 1.9 JTD 16v 2004+ [KM 136] 156 - 1.9 JTD 2003-2005 [KM 126] 156 - 1.9 JTD 2004-2005 [KM 150] 156 Sportwagon - 1.9 JTD 16v Q4 2004-2006 [KM 150] 156 Sportwagon - 1.9 JTD 2005-2006 [KM 150] 156 Sportwagon - 1.9 JTD 2003-2006 [KM 126] 159 Saloon - 1.9 JTDM 8v 2005+ [KM 120] 159 Saloon - 1.9 JTDM 8v 2005+ [KM 115] 159 Saloon - 1.9 JTDM 16v 2005+ [136 KM] 159 Sportwagon - 1.9 JTDM 8v 2006+ [120 KM] 159 Sportwagon - 1.9 JTDM 8v 2006+ [115 KM] GT - 1.9 JTD 2003+ [150 KM] Fiat - M91 and M92Croma engines - 1.9 D Multijet 2005+ [KM 150] Stilo - 1.9 D Multijet 2005+ [KM 150] Stilo Multi Wagon - 1.9 D Multijet 2005+ [KM 150] Opel / Vauxhall - Z19DTH and Z19DTJAstra Mk V (H) engines - 1.9 CDTi 2004-2009 [KM 150] Astra Mk V (H) - 1.9 CDTi 2004-2009 [KM 120] Astra Mk V (H) Estate - 1.9 CDTi 2004-2009 [KM 150] Astra Mk V (H) Sports Hatch - 1.9 CDTi 2004-2010 [KM 150] Astra TwinTop Mk V (H) - 1.9 CDTi 2006+ [KM 150] Astravan (H) - 1.9 CDTi 2005+ [KM 150] Signum - 1.9 CDTi 16v 2004-2008 [KM 150] Vectra MK II (C) - 1.9 CDTi 16v 2004-2005 [KM 150] Vectra MK II (C) GTS - 1.9 CDTi 16v 2004-2005 [KM 150 ] Vectra MK II (C) Estate - 1.9 CDTi 16v 2004-2005 [KM 150] Zafira MK II (B) - 1.9 CDTi 2005-2011 [KM 150] Saab - Z19DTH & Z19DTJ9-3 Saloon engines - 1.9 TiD 2004+ [ KM 150] 9-3 Convertible - 1.9 TiD 2006+ [KM 150] 9-5 Saloon - 1.9 TiD 2006+ [KM 150] 9-5 Estate - 1.9 TiD 2006+ [KM 150] NOTES: The kit fits the original intake manifolds Pierburg Part number - 93179055 55206459 55182684 GM - 55210201