20mm adapters, 5x112 screw spacing changed to 5x100 DM-004

Adapters 20mm, changing the spacing of the bolts 5x112 to 5x100 The price applies to a set for one axle without bolts fixing adapters to the hubs. spacer thickness - 20mm per side (40mm per axis) hole / flange diameter - 57.1mm hole spacing - 5x112mm (hub), 5x100 (rim) bolts to be purchased for attaching hub adapters (wheels are bolted with original bolts) bolt hardness 10.9 Our spacers are made of a PA6 duralumin shaft, thanks to which they are very durable and at the same time light, and thanks to the use of two-stage steel sleeves with a thread, it is not possible to break the thread, as in the case of spacers in which the threads are made of aluminum. tolerance up to 0.05 mm, which ensures accurate centering of the wheel and prevents vibrations on the steering wheel, which p They can be bothered when the rim is not well aligned. The screw-on spacers are also made of duralumin with pressed-in knurled pins or steel threaded bushes, which prevents the threads from breaking. Both the studs and the sleeves are protected against pulling them out when tightening the wheel due to their two-stage shape. The advantage of the spacers is the increase in the track width, thanks to which the car behaves better when cornering, and also looks better because the wheels are not hidden in the fenders. using spacers, we can install rims with other parameters such as greater offset (ET), because we eliminate the difference through spacers. You can also use spacers that change the spacing of the bolts, which allows you to install rims from another car with the same number of mounting bolts. All adapters are made to order and only after payment to the account. Please consider your purchases, because adapters changing the spacing of the bolts are not refundable.