20mm adapters, changing the 5x100 bolt spacing to 5x130 DM-003

Adapters 20mm, changing the spacing of the bolts 5x100 to 5x130 The price applies to a set for one axle without bolts fixing adapters to the hubs. spacer thickness - 20mm per side (40mm per axle) bore / flange diameter - 57.1mm (hub) / 71.6mm (rim) hole spacing - 5x100mm (hub), 5x130 (rim) bolts to be purchased for attaching hub adapters ( the wheels are bolted to the original bolts) the hardness of the bolts 10.9 Our spacers are made of a PA6 duralumin shaft, thanks to which they are very durable and light at the same time, and thanks to the use of two-stage steel sleeves with a thread, it is not possible to break the thread, as in the case of distances in which the threads are used are made of aluminum. Both the bore and the centering flange are created to a tolerance of 0.05 mm, which ensures accurate centering of the wheel and prevents the occurrence of Vibrations on the steering wheel, which occur when the rim is not well aligned. Bolt-on spacers are also made of duralumin with pressed-in knurled pins or steel threaded bushes to prevent thread breakage. Both the studs and the sleeves are protected against pulling them out when tightening the wheel due to their two-stage shape. The advantage of the spacers is the increase in the track width, thanks to which the car behaves better when cornering, and also looks better because the wheels are not hidden in the fenders. using spacers, we can install rims with other parameters such as greater offset (ET), because we eliminate the difference through spacers. You can also use spacers that change the spacing of the bolts, which allows you to mount rims from another car with the same number of mounting bolts. All adapters are made to order and only after payment to the account. Please consider your purchases, because adapters changing the spacing of the bolts are not refundable.