Connecting Rods STD Chevrolet 366, 396, 402, 427, 454 V8 Race Series ACL ACL-8B743H-STD

Connecting rods Chevrolet Std 366, 396, 402, 427 454 c and V8 ACL Race bearings are designed to work in the most extreme conditions and the most strenuous engines. Thanks to many years of experience in the production of bushings, each set is perfectly matched to the engine. Advanced technological process allows The bushing adjusts to the deformation occurring at high revolutions and helps in the formation of hydrodynamic oil films. This technology, combined with the advanced geometry of the bushings, makes them ideal for heavily stressed engines. Most bushings are also available in several other dimensions: STDX -0.025 mm (looser than nominal) STD +0.000 mm (nominal) +0.025 mm (tighter than nominal) +0.25 mm (first shaft grinding) +0.50 mm (second shaft grinding) ACL Race bearings are designed to work in the most extreme conditions and the most strained engines. Thanks to many years of experience in the production of bearing panes, each set is ideally suited to the engine. The advanced technological process allows the bearing to adjust to the deformations arising at high revs and helps in the production of hydrodynamic oil films. This technology, in combination with advanced cup geometry, makes them ideal for heavily strained engines.Most panes are also available in several other dimensions: STDX -0.025 mm (looser than nominal) STD +0.000 mm (nominal) + 0.025 mm (tighter than nominal) + 0.25 mm (first shaft cut) + 0.50 mm (second shaft cut) Chevrolet Std 366, 396, 402, 427 454 c and V8 connecting rods ACL Race shells are designed to operate in the most extreme conditions and the most demanding engines. many years of experience in the production of bushings, each set is perfectly matched to the engine. The advanced technological process allows the bushing to adapt to the deformations occurring at high revolutions and helps in the production of hydrodynamic oil films. This technology, combined with the advanced geometry of the bushings, makes them an ideal solution for engines, most of the bushings are also available in several other dimensions: STDX -0.025 mm (loose lower than nominal) STD +0.000 mm (nominal) +0.025 mm (tighter than nominal) +0.25 mm (first shaft grinding) +0.50 mm (second shaft grinding)