Strengthening the front e36 cups RS-UL-038

The offered strengthening of the front sockets have been designed for the BMW E36 model. They were designed to stiffen the elements that transfer the highest loads during the operation of the front suspension, which can bend during dynamic driving or taking sharp turns, changing the geometry of the vehicle. Thanks to the welding of our kit, the sensitive elements are not only strengthened, but also effectively eliminate the "floating" of the front cups, which additionally translates into better driving characteristics of the E36 model. The reinforcements also effectively prevent knocking out of the curves when hitting unevenness or cavities in the road. The sheets have a special finish of the front part in the form of a double folded sheet to 180 degrees and a rear bend to 90 degrees for even better reinforcement of these elements. The tiles have cut holes in a unique shape, which further enhance the visual effect and give a sporty character.The elements have been designed in such a way that they can be welded in without any additional modifications to the sockets or aprons of the front wheel arches, while allowing the installation of all original elements and provide access to the wiring harness both on the left and right side of the vehicle. The tiles have the largest possible support surface, and thus the forces acting on the sensitive elements are transferred to the adjacent walls. The product is intended for both civilian cars which, due to the passage of time, require stiffening the original elements, as well as for tuning purposes, to prevent their damage during intensive use in sports driving or Drift, KJS, 1 / 4mili, Time Attack, etc. steel S355 with a thickness of 2 [mm] steel, raw welding their sockets dedicated to: BMW E36 Sedan BMW E36 Coupe BMW E36 Cabrio BMW E36 Estate BMW E36 Compact