Strengthening the mounting of the rear wishbones of the BMW E36 RS-UL-036

The reinforcement of the BMW E36 rear wishbone mountings was designed by RS-Ultimate to be precisely matched to the original mountings and floor embossing. The stiffeners can be welded in without any additional modifications to the floor or the wishbones themselves. The reinforcements have many additional bends that are bent in different planes on the left and right sides of the mounting reinforcement to achieve the maximum possible floor reinforcement. The stiffeners have 3 additional sheets of sheet metal on the inside of the reinforcement to "tap" on the semi-circular side of the original embossing in the floor. After sealing, the leaves fit perfectly into the semicircular plane of the embossing. Their unique shape creates gaps between the leaves, which allow the stiffeners to be precisely welded to the floor. The sheets have a large number of cutouts, most of which fall out in the factory welded places, where the floor's durability is the highest. The product is intended for cars that require repairs over time. or reconstruction of the original mount, as well as for tuning purposes to prevent damage during intensive use during Drift, KJS, 1/4 mile competitions, etc. steel S355 with a thickness of 3 [mm] raw steel for welding The set includes: left and right sides Reinforcements for mounting the rear wishbones dedicated to: BMW E36 Sedan BMW E36 Coupe BMW E36 Cabrio BMW E36 Kombi