Reinforcing the floor of the BMW E36 stroller RS-UL-034

The reinforcement of the rear bogie mounting of the BMW E36 was designed by RS-Ultimate to precisely fit the original mountings and floor embossing. The stiffeners can be welded in without any additional modifications to the floor or rear bogie. The set of sheets for reinforcement has additional bends that are bent on the left and right sides of the reinforcements to achieve the maximum possible strengthening of the floor. The stiffeners of the rear mountings have 4 additional sheets of sheet metal to "tap" on the semi-circular side of the original embossment in the floor. After sealing, the leaves fit perfectly into the semicircular plane of the embossing. Their unique shape creates gaps between the leaves, which allow the stiffeners to be precisely welded to the floor. The sheets have a large number of cutouts, most of which fall out in the factory welded places, where the floor's durability is the highest. The product is intended for cars that require repairs over time. or reconstruction of the original mount, as well as for tuning purposes to prevent damage during intensive use during Drift, KJS, 1/4 mile competitions, etc. steel S355 with a thickness of 3 [mm] raw steel for welding The set includes: left and right side Reinforcements for mounting the rear bogie dedicated to: BMW E36 Sedan BMW E36 Coupe BMW E36 Cabrio BMW E36 Kombi The product is intended to strengthen the mounting of the rear bogie of the BMW E36, which is very common during sports driving. becomes damaged. The reinforcements have been designed to maximize the strength of the factory mounting.