Carbon foil Black 100 x 152 cm PP-IN-023

Carbon foil Width 152cm The price applies to 1 meter, i.e. a piece of 100cm x 152cm The highest quality carbon foil. It has a clear structure that can be felt when touching the covered objects. Perfect for wrapping car interior and exterior elements. It is very resistant to weather conditions. It can also be used for wrapping two-wheelers, bicycles or other items. The foil is sent in a special cardboard tube, which protects it from damage. The tube is included in the price of the goods. Buying: 1 piece you get a piece of 100cm x 152 cm2 piece you get a 200cm x 152 cm piece 5 pieces you get a piece 500cm x 152 cm etc ... The maximum length of a piece is 30m foil assembly: - The surface to be glued should be thoroughly cleaned and degreased - Cut the measured piece of material, remembering to leave approx. 3-4 mm on the edges to prevent the foil from peeling off - Remove a few centimeters of the paper backing (adhesive side) - Apply the carbon foil to one of the edge - Gradually removing the paper backing, while pressing the foil with a rubber (e.g. a window cleaner) or a soft cloth - Using a soft rubber object, squeeze out any air bubbles - Using a heat gun or dryer, heat the foil to give it a shape that matches the element - After shaping the foil, cut it exactly to the element with a knife for wallpaper The foil does not damage the material on which it is glued. If something is wrong, you can easily tear it off.Carbon foilWidth 152cm The price is for 1mb, i.e. a piece of 100cm x 152cm The highest quality carbon foil. It has a clear structure that can be felt when touching the wrapped objects. Perfect for wrapping elements of the car interior and external elements. It is very resistant to weather conditions. It can also be used for wrapping two-wheelers, bicycles or other objects. of pieces you get a piece of 200cm x 152 cm 5 pieces you get a piece of 500cm x 152 cm etc ... The maximum length of a piece is 30m If you order a larger quantity, you will receive it in one piece. remembering to leave approx. 3-4 mm on the edges to prevent the foil from peeling off - remove a few centimeters of the paper backing (adhesive side) - apply the carbon foil to one of the edges - gradually remove the paper backing, while pressing the foil with a rubber (e.g. a device) for cleaning windows) or a soft cloth squeeze any air bubbles out by using a soft rubber object - Using a heat gun or a dryer, heat the foil to give it a shape that matches the element - After shaping the foil, cut it exactly to the element with a wallpaper knife. The foil does not damage the material on which it is glued. If something goes wrong, you can easily tear it off.