Elbow 45st D1Spec Black 15mm XL DS-DS-425

45 ° XL elbow by D1Spec, a reinforced element with a 4-fold braid, with a wall thickness of 4 mm, tested up to 7 bar and in the temperature range from -50 to + 260 ° C. Made of the highest quality silicone, resistant to all kinds of oils, greases, etc. Thanks to these parameters, it is perfect for tuning the installation of intercoolers, including the intake.Dimensions: D1 = 15mm D2 = 15mm L = 200mm Our offer also includes mounting bands : Table of clamp sizes Diameter of silicone SGB band GBS band T-Clamp 10mm 17-19 12mm 19-21 19-29 15mm 22-24 22-32 18mm 25-27 25-38 20mm 25-38 25mm 25-38 28mm 32- 44 30mm 32-44 37-42 32mm 32-44 37-42 35mm 35-51 43-49 38mm 35-51 43-49 40mm 35-51 47-55 45mm 38-57 47-55 51mm 44-64 54-62 57mm 51-70 60-68 60mm 64-76 67-75 63mm 64-76 67-75 67mm 70-89 73-81 70mm 70-89 73-81 76mm 70-89 79-87 80mm 76-92 86-94 84mm 80-100 89-99 89mm 90-110 89-99 102mm 90-110 105-113 Elbow 45 ° XL by TurboWorks, four time braided, with a 4mm wall thickness, tested up to 7 bar in tepmerature range -50 to +260 ° C. Made of highest quality silicone, resistant for all kinds of oils and greases. Perfect for tuned cars, used to create intercoolers pipings, air intakes, and cooling systems. Dimensions: D1 = 15mm D2 = 15mm L = 200mm Hight quality clamps are also availible in our offer: Clamp size chart: Silicone diameter SGB Clamp GBS Clamp T -Clamp 10mm 17-19 12mm 19-21 19-29 15mm 22-24 22-32 18mm 25-27 25-38 20mm 25-38 25mm 25-38 28mm 32-44 30mm 32-44 37-42 32mm 32-44 37-42 35mm 35-51 43-49 38mm 35-51 43-49 40mm 35-51 47-55 45mm 38-57 47-55 51mm 44-64 54-62 57mm 51-70 60-68 60mm 64-76 67 -75 63mm 64-76 67-75 67mm 70-89 73-81 70mm 70-89 73-81 76mm 70-89 79-87 80mm 76-92 86-94 84mm 80-100 89-99 89mm 90-110 89- 99 102mm 90-110 105-113 D1Spec 45 ° XL elbow, 4-fold reinforced element, 5mm wall thickness, tested up to 7 bar and temperature range from -50 to +260 degrees C. Made of the highest quality silicone , resistant to all kinds of oils, greases, etc. Thanks to these parameters, it is perfect for tuning, assembly and ntercoolers, also inlet Dimensions: D1 = 15mm D2 = 15mm L = 200mm