STDX main bearings Subaru EJ18, EJ20, EJ22, EJ25EJ20T, EJ20TT, EJ22T, EJ25T 1820-1994-2212-2457cc H4 Race Series ACL ACL-5M8297HX-STD

Subaru STDX main bearings Subaru EJ18 / EJ20 / EJ22 / EJ25EJ20T / EJ20TT / EJ22T / EJ25T (Turbo / Twin Turbo) 1820cc / 1994cc / 2212cc / 2457cc H4 ACL Race shells are designed to operate in the most extreme conditions and the most demanding engines. many years of experience in the production of bushings, each set is perfectly matched to the engine. The advanced technological process allows the bushing to adjust to the deformations occurring at high speed and helps in the production of hydrodynamic oil films. This technology, combined with the advanced geometry of the bushings, makes them an ideal solution for Most of the bushings are also available in several other dimensions: STDXX -0.025 mm (looser than nominal) STDX +0.000 mm (nominal) +0.025 mm (tighter than nominal) +0.25 mm (first shaft grinding) +0 , 50 mm (second shaft cut) ACL Race bearings are designed to work in the most extreme conditions and the most strained engines. Thanks to many years of experience in the production of bearing panes, each set is ideally suited to the engine. The advanced technological process allows the bearing to adjust to the deformations arising at high revs and helps in the production of hydrodynamic oil films. This technology, in combination with advanced cup geometry, makes them ideal for heavily strained engines.Most panes are also available in several other dimensions: STDX -0.025 mm (looser than nominal) STD +0.000 mm (nominal) + 0.025 mm (tighter than nominal) + 0.25 mm (first shaft cut) + 0.50 mm (second shaft cut) Main bearings Subaru Std Subaru EJ18 / EJ20 / EJ22 / EJ25EJ20T / EJ20TT / EJ22T / EJ25T (Turbo / Twin Turbo) 1820cc / 1994cc / 2212cc / 2457cc H4 ACL Race is designed to work in the most extreme conditions and the most strenuous engines. Thanks to many years of experience in the production of bearings, each set is perfectly matched to the engine. hydrodynamic oil films. This technology, combined with the advanced geometry of the bushings, makes them an ideal solution for highly stressed engines. Also available in several other dimensions: STDX -0.025 mm (looser than nominal) STD +0.000 mm (nominal) +0.025 mm (tighter than nominal) +0.25 mm (first shaft grinding) +0.50 mm (second shaft grinding )