Thermal insulation blanket for turbines T4 Black EPMAN MG-TT-053

T4 turbocharger blanket The purpose of the blanket is to lower the temperature under the hood of the car through thermal insulation of the turbine. The heat of the turbocharger is kept inside the system, which increases the temperature of the exhaust and increases the rate of exhaust gas release. The retained heat also has a positive effect on the temperature of cooling elements, such as the Intercooler or the radiator. Heat resistance up to 1100 ° C. The set includes a blanket and springs holding the blanket on the turbine. The following are also available for thermal blankets: Thermal tapes NOTE! The cover is not fireproof! Any hot liquid leak can start a fire. We recommend a thorough diagnosis of the turbine and cables before installing the cover, it is not recommended to disassemble the cover after a longer period of use. The material loses its elastic properties and may not be reusable! The material does not lose its thermal properties! A blanket for a T4 turbocharger. The blanket is designed to lower the temperature under the hood of the car through thermal insulation of the turbine. The heat of the turbocharger is kept inside the system, which increases the temperature of the exhaust and increases the rate of exhaust gas release. The retained heat also has a positive effect on the temperature of cooling elements, such as the Intercooler or the radiator. Heat resistance up to 1100 ° C. The set includes a blanket and springs that keep the blanket on the turbine.